PRODUCT
Search
  • VAN XẢ NƯỚC NUFORS-CR, 3805
VAN XẢ NƯỚC NUFORS-CR, 3805

VAN XẢ NƯỚC NUFORS-CR, 3805

Code: 3805

Model: NUFORS-CR

VAN XẢ NƯỚC TỰ ĐỘNG KIỂU PHAO
HÃNG SẢN XUẤT: JORC
XUẤT XỨ: HÀ LAN
MODEL: NUFORS-CR
MÃ SỐ: 3805 (1/2'', 0-16 bar)

Lưu lượng cho máy nén khí 100m3/phút
Lỗ xả lên đến 6 mm
Áp làm việc max: 3-16 bar
Kết nối ren vào: 1/2'' (21mm)
Kết nối ren ra: 1/4''
Ứng dụng: Lắp đặt ở những chỗ cần xả lưu lượng lớn như (Máy sấy khí, Bình chứa khí, ...)

VAN XẢ NƯỚC NUFORS-CR, 3805

The NUFORS-CR removes condensate from compressed air systems without using electricity and without the unnecessary loss of compressed air.

The discharge process is automatic and is based on a 3/2 way level controlled valve principle that operates a piston type direct acting valve. The advantage of this valve principle is that the NUFORS-CR’s orifice can be 6 mm, offering an increased reliability factor.

The NUFORS-CR is ideally suited in applications where power is not available, too expensive or not reliable. The NUFORS-CR features a specially treated robust aluminium housing suitable for oil lubricated and oil-free applications.

In addition, the NUFORS-CR can be applied in applications that demand a higher IP rating (International Protection rating or Ingress Protection). The NUFORS-CR offers an IP68/NEMA6 rating.

FEATURES

Integrated strainer to protect the valve.

Test feature for routine testing.

Robust aluminium housing with three inlet options, offering you installation flexibility.

  • Competitive ‘true green’ solution.
  • No operating costs.
  • No electricity required - install and go!
  • Operating pressure up to 16 bar.
  • Reduced stocking costs - 1 model covers 100 m³/min.
  • Suitable for any type of compressed air system.
  • No complicated sizing charts required.
  • Compact and unique design.
  • Successful draining of condensate due to large orifice (also heavily emulsified condensate).
  • Incredibly easy and quick to install and to service.
  • No complicated control air line and pressure regulator required.
  • Integrated strainer.
  • Top and side inlets available.
  • Test feature.
  • Robust aluminium housing.
  • Direct acting valve construction for a reliable condensate discharge operation.

SPECIFICATIONS

MAX. COMPRESSOR CAPACITY 100 m³/min. (3500 CFM)
MAX. DRAINAGE CAPACITY 1062 liters condensate per hour at 16 bar
MIN./MAX. SYSTEM PRESSURE 3 - 16 bar (44 - 230 psi)
MIN./MAX. MEDIUM TEMPERATURE 1 - 50 °C (34 - 122 °F)
MIN./MAX. AMBIENT TEMPERATURE 1 - 50 °C (34 - 122 °F)
ENCLOSURE PROTECTION RATING IP68 (NEMA6)
INLET CONNECTIONS 1/2″ BSP or NPT, 3 inlet options
INLET HEIGHT 12 cm (top) and 9.7 & 1.5 cm (side)
OUTLET CONNECTION 1/4″ BSP, with brass hose barb adapter
VALVE TYPE Direct acting
VALVE ORIFICE 6 mm
VALVE SEALS FPM
SERVICEABLE VALVE Yes
INTEGRATED MESH STRAINER Yes
HOUSING MATERIAL Corrosion resistant aluminium, EP coating
TEST FEATURE Yes

 

| Product Other|

PRODUCT