PRODUCT
Search
  • Van xả nước tự động NUFORS-XF
Van xả nước tự động NUFORS-XF

Van xả nước tự động NUFORS-XF

Code: NUFORS-XF

Model: NUFORS-XF

VAN XẢ NƯỚC TỰ ĐỘNG KIỂU PHAO
HÃNG SẢN XUẤT: JORC
XUẤT XỨ: HÀ LAN
MODEL: NUFORS-CR
MÃ SỐ: (3/4'', 0-16 bar)

Lưu lượng cho máy nén khí 500m3/phút
Áp làm việc max: 3-16 bar
Kết nối ren vào: 3/4'' (34mm)
Kết nối ren ra: 1/2''
Ứng dụng: Lắp đặt ở những chỗ cần xả lưu lượng lớn như (Máy sấy khí, Bình chứa khí, ...)

The NUFORS-XF removes all types of condensate from large capacity compressed air applications up to 500 m³/min, without using electricity and without the unnecessary loss of compressed air. The NUFORS-XF has an exceptional large condensate discharge capacity of 4.800 litres per hour at 16 bar.

The discharge process is automatic and is based on a 3/2 way level controlled valve principle that operates a piston type direct acting valve. 

The NUFORS-XF is ideally suited in applications where power is not available, too expensive or not reliable. The NUFORS-XF features a specially treated robust aluminium housing suitable for oil lubricated and oil-free applications.

In addition, the NUFORS-XF can be applied in applications that demand a higher enclosure protection rating. The NUFORS-XF offers an IP68/NEMA6 rating.

FEATURES

Three inlet options for easy installation.

Test feature for routine testing.

The NUFORS-XF on its optionally available mounting bracket.

  • Suitable for large capacity compressed air applications up to 500 m³/min.
  • No electricity required - install and go
  • No operating costs
  • Competitive ‘true green’ solution
  • Reduced stocking costs - 1 model covers 500 m³/min.
  • No complicated sizing charts required
  • Consult JORC for private labeling options
  • Level sensing drain technology
  • Incredibly easy and quick to install and to service
  • No complicated control air line and pressure regulator required
  • Top- and side inlets available
  • Test feature for routine testing
  • Robust corrosion resistant aluminium housing
  • Direct acting valve construction for a reliable condensate discharge operation
  • Successful draining of, even heavily emulsified, condensate due to a large 12 mm valve orifice

SPECIFICATIONS

MAX. COMPRESSOR CAPACITY 500 m³/min. (17500 CFM) guideline only
MAX. DRAINAGE CAPACITY 4800 litres condensate per hour at 16 bar
MIN./MAX. SYSTEM PRESSURE 3 - 16 bar (44 - 230 psi)
MIN./MAX. MEDIUM TEMPERATURE 1 - 50 °C (34 - 122 °F)
MIN./MAX. AMBIENT TEMPERATURE 1 - 50 °C (34 - 122 °F)
ENCLOSURE PROTECTION RATING IP68 (NEMA6)
INLET CONNECTION 3/4" BSP or NPT, 3 inlet options
INLET HEIGHT 15.1 cm (top), 13.3 cm and 1.8 cm (side)
OUTLET CONNECTION 3/4" BSP, with brass hose barb adapter
VALVE TYPE Direct acting
VALVE ORIFICE 12 mm
VALVE SEALS FPM
SERVICEABLE VALVE Yes
HOUSING MATERIAL Corrosion resistant aluminium, EP coating
TEST FEATURE Yes

 

| Product Other|

PRODUCT